Left
Servo Stabilizers Manufacturer: Industrial Electrical Corporation
Logo L. T. Transformer
This is two winding device. Functioning of this device is to step up or to step down the voltage as per require voltage.
There are a two type basic raw materials.
1. C.R.G.O. / C.R.N.G.O. silicon steel laminations.
2. Copper winding
We design in such a manner to produce the flux & convert the voltage in secondary winding.
Copper winding are in two stages.
1. Primary winding
2. Secondary winding
If the required voltage is lower than supply voltage then its work as step down transformer. If required voltage is higher than supply voltage then its works as a step up transformer. Transformer ratings always consider in KVA. The ratings are depends on input & output voltages & current delivered by the unit.

Features
arrow Excellent voltage regulations & efficiency arrow Rugged mechanical construction
arrow No wave form distortion arrow Moderate temperature rise
arrow Simple & easy to handle arrow High short time surge current capacity
Application
arrow Industrial purpose for control circuits
arrow Instrumentation supply
Testimonials
arrow Check Rating arrow No load losses Test
arrow Insulation Resistance Test arrow Output Voltage Test
arrow Winding Resistance Test arrow High Voltage Test
arrow Voltage Ratio on normal / tap position arrow Induced Voltage Test
arrow No load Current Test    
PRODUCTS RANGE
Arrow
Arrow
Arrow
Arrow
Arrow
Arrow
Arrow
Arrow
Contact Us
Contact
Industrial Electrical Corporation
602, Phase - IV, GIDC Vatva,
Ahmedabad, Gujarat - India.
Pin/Zip Code : 382 445.
Phone: 091 - 79 - 25831047
Fax: 091 - 79 - 25834379
E-Mail: mn_ppk@bsnl.in
info@servostabilizers.com
Right